Quantcast
Viewing all articles
Browse latest Browse all 91

Traditional Air Conditioning Installation Recommendations

There are several “do it yourself” air conditioning installment programs provided through the net, some of which are extremely valuable and others that provide just the extremely standard steps for installment. It is important to bear in mind that improperly doing your air conditioning installment can end up costing you more cash in the long run, so be sure to clarify any concerns and entirely understand the process before you start.

The first step in completing your air conditioning installment process is to entirely review the makers handbook. You will need to be trained and licensed in handling the refrigerant or coolant, or you will need to contract with somebody to do this action. In addition, if you are not an electrician, it is always best to have an expert complete this action so you dont end up wasting time and cash later on when the building is inspected. If you need to get any permits, be sure to do so prior to starting the air conditioning installment.

Make certain that you have all the essential materials before starting the project. This consists of tools, the air conditioning unit itself, ducts and hangers and other equipment or materials needed as per the makers instructions and your very own specific building. The next action is to find the outdoor part of the unit on level ground, preferably in a shady spot, near the house and at least 3 feet from an electric or gas meter as per building codes in your area. Have a concrete pad to place the unit on and secure as required. A small hole is then drilled through the wall to enable electrical wires and pipelines to stretch from the internal to external unit.

Put the internal unit in the plenum above the heater as per the makers instructions. Attach the suction line that will carry the moisture between the inside unit and the condenser on the outside. At this point the high voltage connects need to be made by an expert electrician. There are also low voltage wires that will need to be connected, these can be done by the electrician or by the homeowner as per the air conditioning installment instructions provided http://www.kkellyinc.com/ .


Viewing all articles
Browse latest Browse all 91

Trending Articles